Ten habits that turn a quick recording into a note you would sign. Each one shows what you say and what Neuveria writes.
Start with where, then what
Location first lets Neuveria put the note in the right part of the report. Then say what you see.
You say
“North elevation, third floor, window three-oh-seven. The perimeter sealant is cracked.”
Neuveria writes
At window 307 on the third floor of the north elevation, the perimeter sealant was cracked.
Give numbers with units
Say the unit every time. Measure the way you normally do: feet come out in metres, inches in millimetres, with the imperial in brackets. Rough is fine; say “about”.
You say
“Crack about thirteen feet long, up to a sixteenth of an inch wide.”
Neuveria writes
The crack was approximately 4.0 m (13'-0") long and up to 1.6 mm (1/16") wide.
Say the condition, then the action and who does it
“Contractor to…”, “consultant to review…”, “for information”. That turns an observation into an item someone can close.
You say
“Two hangers missing nails. Contractor to install them before the shoring comes out.”
Neuveria writes
Two hangers were missing nails. The contractor is to install the missing nails before the shoring is removed.
Say “outstanding” or “non-compliant” to flag it
In a Site Walk, a note is flagged only when you say the word. Say “outstanding” for work still to be done or corrected, and “non-compliant” when it does not meet the drawings, specifications or code. You can also set or clear the flag yourself on any note.
You say
“Two hangers at the north end are missing nails. This is outstanding.”
Neuveria writesOutstanding
Two hangers at the north end were missing nails. This item remains outstanding.
One recording per item, then its photos
In Site Walk, record one item, stop, then take the photos for it. Each photo stays with the note it shows.
You say
“(record) East foundation wall, membrane laps look good. (stop, take two photos)”
Neuveria writes
One note on the east foundation wall, with its two photos attached.
Say the weather and who is on site once
Say it in any recording. It goes into the report header, not into a note.
You say
“Sunny, about eight degrees. Framing crew and the waterproofer are on site.”
Product names, company names and people. Spell them once and they come out right.
You say
“The sealant is Sikaflex, that's S-I-K-A-F-L-E-X.”
Neuveria writes
The sealant was Sikaflex.
Don't worry about ums and restarts
Talk the way you would to a colleague. Repeats and false starts are cleaned up. You still review every note before it goes out.
You say
“The, uh, the slab, no, the topping at the ramp is cracked, sorry, hairline cracks.”
Neuveria writes
Hairline cracks were observed in the topping at the ramp.
Leave out what is already in the header
The project, address and client are already on the report. You don't need to say them, and keeping them out of recordings keeps them private.
You say
“Ramp heating cables are in, two zones, tied to the mesh.”
Neuveria writes
The ramp heating cables were installed in two zones and tied to the mesh.
Ask for a different style when you need it
Say it once, in any recording: Neuveria follows it for the rest of your session and the instruction itself stays out of your notes. It applies only to you, never changes your firm's rules, and is gone the next time you open the app.
You say
“For today, keep everything in inches, no conversions.”
Neuveria writes
Measurements stay in inches in your notes until you close the app.
Examples by topic
What to cover and how to say it, for the things you review most.