Guide Insulation

Insulation

What to say when you review spray foam and other insulation before it is covered.

Closed-cell spray foam insulation between studs in a framed basement wall

Say it like this

Talk the way you would to a colleague on site. Below each recording is the note Neuveria writes from it. You review and edit every note before the report goes out.

Spray foam thickness

You say

“Basement walls, closed cell spray foam is done between the studs, about two inches thick. I checked it in five spots with a probe, readings were two to two and a quarter inches. Rim joists are sprayed too.”

Neuveria writes

Closed-cell spray foam insulation was installed between the basement wall studs to a thickness of approximately 50 mm (2"). The insulation was reviewed at five locations using a probe, with measured thicknesses ranging from 50 mm to 55 mm (2" to 2-1/4"). Spray foam insulation was also installed at the rim joists.

Gaps at boxes

You say

“Around the electrical boxes on the north wall there are gaps, about six boxes, and one bay by the window only has about an inch. This is outstanding. Contractor to top it up before the drywall goes on.”

Neuveria writesOutstanding

Gaps were observed around approximately six electrical boxes on the north wall. One bay adjacent to the window contained only approximately 25 mm (1") of insulation. This work remains outstanding. The contractor is to top up the insulation before the drywall is installed.

See it with your own projects

A 20-minute call where we walk through a real report from start to finish, or watch the 13-minute video first.

Book a demo